11070 S Pipeline Rd
Euless, TX 76040

Construction Forks

Forks & Carriages

Pipe And Pole Forks (PPF) – Atlanta Equipment offers nine models of fork carriages providing durability, functionality and versatility to your wheel loader. Features include adjustable tine spacing, variety of carriage and fork lengths, fork locks, optional hydraulic fork positioners and optional side shift.

Pipe And Pole Forks (PPFTC) – We offer five models with single or double top clamp designed to hold 2 inch (51mm) to 48 inch (1,219 mm) diameter pipe in position prohibiting damage. This is an excellent tool for pipe yard and utility contractor applications.
Pipe And Pole Grapple (PG) – Our pipe and pole grapple is designed for large wheel loaders. Grapple product range will handle pipe and pole diameters from 43 inches (1,092 mm) to 60 inches (1,524 mm) diameter
Bucket Forks can adapt to any loader bucket allowing greater overall machine utilization
Mill Yard Carriage has been designed specifically for the lumber yard. features hydraulically actuated backrest and side shift for maximum material handling and reduced product damage.
Guest Industries Forks

FABRICATED 3 POINT HITCH FORKS

  • Rugged tubular design
  • Tines and uprights are drilled for attachment of timbers
  • Tips slope down for easier loading

SPECIFICATIONS – MODEL 3P-1500

Rated Lift Capacity (lbs.)* 1,500
Usable Tine Length (in.) 36
Vertical Height (in.) 24
Tine Spacing, Outside (in.) 30
Tine Width (in.) 3
Tine Thickness (in.) 2
Net Weight (lbs.) 91
*Rating is based on ½ of load at mid-length of each tine. Design safety factor is 100% above rating.

FABRICATED FORKS CUSTOM DESIGNED FOR SPECIAL APPLICATIONS

  • Forks designed for 35,000 lbs. rated lift capacity. Tines have fixed spacing. Back columns are 96″ high. Used for handling stacks of crushed auto bodies.
  • Forks designed for 10,000 lbs. rated lift capacity. Tines have fixed spacing and are 16 ft. long. Used for handling automobiles lengthwise.
  • Forks designed for 45,000 lbs. rated lift capacity. Tine spacing is adjustable. This set of forks was made to fit a Cat 988B. All forks are made with adapters custom designed to fit the loader.

FABRICATED TOP MOUNTED FORKS

  • On and off in seconds-by rolling bucket
  • Tie-back chains hold forks back when withdrawing from under load (optional)
  • Fork spacing easily adjusted
  • When detached, forks stand ready for easy remounting
  • No gusset or radius to interfere with square load

SPECIFICATIONS

Model 20 40S 40L 60C 70S 70L 100 150 250
Rated Lifting Capacity (lbs.) 2,000 4,000 4,000 6,000 7,000 7,000 10,000 15,000 25,000
Fits Vertical Bucket Opening (in.) 22-31 24-35 30-41 36-52 26-42 36-52 40-62 50-68 64-80
Useable Tine Length (in.) 36 42 42 60 45 45 48 52 72
Riser Height (in.) 36 41 47 54 44 54 68 72 85
Tine Tip Thickness (in.) 3/8 3/8 3/8 1/2 5/8 5/8 3/4 3/4 1
Max. Tine Thickness (in.) 2 2 2 3 2 3/8 2 3/8 2 3/4 3 5
Tine Taper Length (in.) 6 6 6 46 34 34 37 43 56
Tine Width (in.) 3 4 4 5 5 5 6 8 8
Adj. Width (in.) to 55 to 76 to 76 to 76 to 76 to 76 to 76 to 76 to 96
Number of Mounting Brackets 3 3 3 4 4 4 4 4 5
Net Weight (lbs.) 174 287 297 472 426 442 722 963 1634

FABRICATED LIP MOUNTED FORKS

  • Ready to use in seconds
  • Built-in manual clamp – no tools needed
  • Handle at top of riser makes mounting and handling easy
  • Riser allows load to be cradled to prevent movement when traveling

The clamps have a slide-able handle so that the forks may be mounted against the sides of the bucket when maximum spacing is needed. These forks are the least expensive and are very practical when loaders at several locations must use the same forks. They are also easy to store or remove from the jobsite if security is a problem.

SPECIFICATIONS

Model 1000 2000 3500 4000S 4000B 8000S 8000B
Rated Lifting Capacity (lbs.) 1,000 2,000 3,500 4,000 4,000 8,000 8,000
Useable Tine Length (in.) 36 36 48 42 42 48 48
Riser Height (in.) 10 10 12 12 12 17 17
Tine Tip Thickness (in.) 1/4 3/8 1/2 1/2 1/2 3/4 3/4
Max. Tine Thickness (in.) 1 1/4 2 2 1/4 2 1/4 2 1/4 2 3/4 2 3/4
Tine Taper Length (in.) 3 1/2 9 1/2 32 32 32 37 37
Max. Bucket Lip Thickness (in.) 1 1 3/8 1 3/4 1 3/4 2 1/4# 1 7/8 2 1/2#
Tine Width (in.) 2 3 4 4 4 6 6
Net Weight per pair (lbs.) 83 114 246 226 252 411 545

*Rating is based on 1/2 load halfway out on each tine. Each Fork is static load tested, Model 1000 to 200% of rating, Model 2000 to 300% of rating and Models 3500, 4000S, 4000B, 8000S and 8000B to 250% rating.
#Model 4000B and 8000B is designed for buckets with a BOLT-ON EDGE

For more information fill out our online information request form or call us at 800.359.9108

Request a Free Quote on Construction Forks

For additional information contact us today at 1-800-359-9108. We provide sales and rental of our equipment from coast to coast.

 

Get a Free Quote